- Thomas Weinhart
- Mitchel Post
- Juan Esteban Alvarez
- Hongyang Cheng
- Yousef Shaheen
- Former user (Deleted)
- João de Oliveira Barbosa
- gao han
- Julius Mbaziira
Missing days
| Person | 23 | 24 | 25 | 26 | 29 | 30 | 1 | 2 | 3 | 6 | 7 | 8 | 9 | 10 | 13 | 14 | 15 | 16 | 17 | 20 | 21 | 22 | 23 | 24 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Invite | Connect | Connect | Connect | |||||||||||||||||||||
| Anthony | Marnix Defense | Teaching ParTec Course | UC Meeting Agglo | Teaching | Additive manufacturing workshop | |||||||||||||||||||
| Thomas | Marnix Defense | UC Meeting Agglo | Visit TU B. | Additive manufacturing workshop | ||||||||||||||||||||
| Juan | Academic Publishing -Course | Particle Technology Course | Academic Publishing -Course | Additive manufacturing workshop | ||||||||||||||||||||
| Luca | ||||||||||||||||||||||||
| Mark Franssen | ||||||||||||||||||||||||
| Mitchel | 08:00 - 13:00 TGS Ac. Publ. | Particle Technology Course | User comittee meeting | 15:00 C++ Exams | TGS Ac. Publ. | TGS Sc. Information | ||||||||||||||||||
| Joao de Oliveira Barbosa | ||||||||||||||||||||||||
| Hao | Chinese Embassy | IHC-Coupling | IHC-coupling | Working on IFPRI, Go to Chinese Embassy on Tuesday morning. | Jigging, IFPRI and Durai's defense | Jigging, IFPRI, Go to Zwolle after 13:30 | Morning in the office check the new simulations for Jigging, come to DesignLab this afternoon. | IFPRI + GRMA | Visa as US consulate and Go to Schiphol | |||||||||||||||
| Steve | Academic Publishing -Course | Particle Technology Course | Academic Publishing -Course | Burgersdag JMBC Conference |
| |||||||||||||||||||
| Han | Leave at Afternoon | Day off | Particle Technology Course | Introduction meeting for new Staff at the UT | TB test - Appointment Community Health Service 10:30 | |||||||||||||||||||
| Julius | Introduction meeting with the PDEng coordinator at 15:00 | Computational Fluid Dynamics (CFD) Course 08:45 - 10:30 | Particle Technology Course | Computational Fluid Dynamics (CFD) Course 08:45 - 10:30 |
| Introduction meeting for new Staff at the UT, scheduled by the secretariat of the HR department | Computational Fluid Dynamics (CFD) Course 08:45 - 10:30 | |||||||||||||||||
| Hongyang | Meeting With Stefan at 11.00 | Meeting with Matthias (9am?) | Conference at DUT, China | Burgersdag | ||||||||||||||||||||
| Yousef |
| 15:00, Matlab exam | off | Preparing for:
| off | UC meeting | Annual review-Horra Finita | off | In the office | off | Working in the office | AM workshop | ||||||||||||
Conflicting events:
- Particle technology April 29th - May 3rd.
- JMBC Burgersdag May 21-22
- Additive maufacturing workshop: May 23
- Visit TU Braunschweig: May 9
- UC Meeting Agglo: May 7
- Defense Marnix: April 25
SVN handout
- Spend a month to implement/improve/document features in MercuryDPM we all deem important
- Dates: April 23- May 24, 2019
- This can be topics particular to your research, but more improtantly general improvements.
- We make a list of topics, everyone picks what he will work on (in groups, possibly).
- We have daily meetings to discuss progress.
- At the end of the month we release a new version of MercuryDPM.
- Check what still needs to be done from last years list: MercuryMonth April 2018 and put into new list.
- @all: if you have features that are needed, add them; ideally before next weeks meeting; who works on what can be decided later
| What | Who | Priority | Comments | |
|---|---|---|---|---|
| JIRA Jobs | All |
| Everyone who still has open JIRA jobs, finish them | |
| oomph-lib coupling | ViPr + Mitchel | Define and implement an interface between MercuryDPM and oomphlib | ||
| Documentation | Thomas | Force laws: Add references, explanations to the force laws | ||
| ... | A lot of code needs documentation; this is a good place to start for beginners to get familiar with the code | |||
| Juan | User Manual | |||
| Parallel code | Generalise restarting | |||
| Efficiency | Part of Mercury needs to become more efficient. Error rendering macro 'jira' : Unable to locate Jira server for this macro. It may be due to Application Link configuration. | |||
| Paper | Anthony Thornton Thomas Weinhart | |||
| Meltable DEM | Yousef Shaheen | |||
| Ant | Update Doxygen
| |||
| Analytical screw - I | Luca | Luca - 1 | Proper implementation of the auger screw / write self-test / write proper documentation | |
| Analytical screw - II | Luca | Luca - 3 | Resume implementation of coarse-concave screw | |
| New contact law for clusters | Luca | Luca - 1 | Implementation of inter- and intra-clusters cohesion, implementation of clusters history |
Room booking
As CONNECT is your preferred room I booked it unless it was taken. In those cases I booked INFORM and as a third choice INVITE. Sometimes there is unfortunately no other option than change of room during the day (2nd May and 7th May). Sometimes I booked until 17:30 as the dreamteam need to have 30 minutes to make a new set up for the next group.
In CONNECT you will use the walls as white boards. I will take care of pens and you will bring the paper. When you are in INFORM I will take care of white boards. In INVITE you can also use the wall as white board.
In CONNECT one honey cumb will be in the middle. Three groups of tables with a whole. Please see the link of the digital version of the look book https://www.utwente.nl/en/designlab/organisation/Facilities/.
When you have INFORM I propose to have a set up of 3 double tables with 4 chairs for each group. In INVITE you cannot change the set up much.
Below are the reservations I made for you in the system. Please let me know if this is correct or you wish any changes.
dinsdag 23 april 2019 9:00 | GY Invite (15) |
woensdag 24 april 2019 9:00 | GY Connect (20) |
donderdag 25 april 2019 9:00 | GY Connect (20) |
vrijdag 26 april 2019 9:00 | GY Connect (20) |
maandag 29 april 2019 9:00 | GY Connect (20) |
dinsdag 30 april 2019 9:00 | GY Invite (15) |
woensdag 1 mei 2019 9:00 | GY Connect (20) |
donderdag 2 mei 2019 9:00 | GY Connect (20) |
donderdag 2 mei 2019 12:30 | GY Invite (15) |
vrijdag 3 mei 2019 9:00 | GY Connect (20) |
maandag 6 mei 2019 9:00 | GY Connect (20) |
dinsdag 7 mei 2019 9:00 | GY Connect (20) |
dinsdag 7 mei 2019 13:00 | GY Inform (50) |
woensdag 8 mei 2019 9:00 | GY Connect (20) |
donderdag 9 mei 2019 9:00 | GY Connect (20) |
vrijdag 10 mei 2019 9:00 | GY Inform (50) |
maandag 13 mei 2019 9:00 | GY Inform (50) |
dinsdag 14 mei 2019 9:00 | GY Invite (15) |
woensdag 15 mei 2019 9:00 | GY Connect (20) |
donderdag 16 mei 2019 9:00 | GY Connect (20) |
vrijdag 17 mei 2019 9:00 | GY Connect (20) |
maandag 20 mei 2019 9:00 | GY Connect (20) |
dinsdag 21 mei 2019 9:00 | GY Invite (15) |
woensdag 22 mei 2019 9:00 | GY Connect (20) |
donderdag 23 mei 2019 9:00 | GY Connect (20) |
vrijdag 24 mei 2019 9:00 | GY Connect (20) |
The dreamteam will give a presentation on the background of DesignLab on the second day: April 24 at 10:00.